Code : GOD80B, GOD24B, GOD20D, GOD80A, GOD115C, AVSA12A, AVSA08A
Brand : KTC
Changing Engine Oil
Change the oil easily and effectively with a oil drainer.
Use a tray to catch the waste oil.
• Use a large wide hat type funnel to catch the waste oil.
• Use a funnel with an attached net to prevent debris such as drain plug from falling into
the tank.
• Remove the wide hat for use in hard to reach areas.
• Offsetting is possible from the unit and the pipe making work easy. (*This pack (Orirukun)
is not included)
Air pressure for easy discharge of used oil.
• Discharge is possible without a complex operation.
• Discharged hose can be stored when it is not being used.
A large tank with a level gauge attached.
• The tank's free capacity can be seen and calculated.
• Large amounts of oil can be stored safely in large capacity tanks.
Moveable parts tray
• Convenient for temporarily storing tools, i.e. draining plug, etc. Size: 95 ×150 × 45
Pipe handles allow for easy movement.
Large castors provide easy movement and stability.
• Curbs and steps pose no problems. (2 front wheels)
The castor wheels are equipped with a double brake mechanism that prevents both travel and swivel.
• The machine can be held steady during operation. (1 rear wheel and both front wheels
of the machine (Oriru-kun))
Oil Filter Wrench Series
There are four KTC wrenches available to deal with
the various types of oil filters - cup type, chain type,
band type and adjustable type. In particular, there are
31 sizes in total for the cup size - 12 sizes for domestic
cars, 13 sizes for imported cars and 6 sizes for larger
vehicles.
Characteristics of Oil Filter Wrenches
● A low height, easy fit, non-slip large design
A design that is restricted in height, easy to operate, and has a
large area for the oil filter wrench and the oil filter to work in
(depth of the fitting area).
● Improved operation!
With its gripped outer shape, slippage when fitting the oil filter
by hand is reduced.
● The aluminum tool weighs only 60% of conventional steel products.
Through aluminum die-casting, the wrench has been molded
into a single entity* to weigh just 60% of conventional steel
products.
*With a large diameter, an insert manufacturing method is employed that
has applied steel onto the driving angles (Structural steel).
● Drive tool choice
Depending on the working requirement, an inserting type or a
hexagonal type is available. (For domestic and imported
vehicles: Use the driver 3/8"sq. hexagonal 2-faced width
24mm) (For larger diameters: Use the 1/2"sq. hexagonal 2-
faced width 27mm)